To submit an article online, and to check the status of your submission, you need to have an account with Journal of Veterans Studies
Don't have an account? Register Here.Start Submission
It is free to submit to and publish within the journal. All submissions should be made electronically through this website. Once submitted, the author can track the submission and communicate with the editors via the online journal management system.
Please ensure that you consider the following guidelines when preparing your manuscript. Failure to do so may delay processing your submission.
The Journal of Veterans Studies welcomes multiple submission types: articles, interviews, program profiles, book reviews, veterans voices, infographics, and announcements. We also welcome proposals for special issues.
1. Original research articles relevant to veterans studies, including those that address teaching veterans studies (broadly conceived) and theorizing veterans studies (broadly conceived). All perspectives and topics of general interest to the profession are welcome.
Articles should be between 8,000 – 10,00 words and/or 20 double-spaced pages. Authors may use any recognized format for initial reviews; however, accepted articles must use APA 7th edition citation style. Submissions must be free of authors' names and other identifying markers, including metadata and institutional affiliation. Works previously published or multiple works by a single author / author team are not acceptable.
2. Program / Project Profiles of nonprofit organizations, veterans-only college courses, veterans studies major / minors, peer-to-peer mentoring initiatives, community engagement projects or veteran-centered community engagement projects, are just a few suggestions of possible programs authors can profile. Though shorter or longer profiles will be considered, a suggested length of 5,000-7,000 words is preferable. Profiles must include:
We accept the following file formats: .doc, .docx, and .rtf.
3. Interviews: We welcome interviews with key figures affiliated to the interdisciplinary field of veterans studies. Interviews can include media and should not exceed 5,000 words. Please send interview queries and manuscripts to the interview editor.
4. Book Reviews: The Journal of Veterans Studies publishes reviews of art installations, films, books, websites, and other multimedia that may be of interest to teachers, scholars, and advocates of veterans studies. Reviews of single sources should be about 1,500 words and review essays should be 2,500-3,000 words. Book Reviews are solicited by Book Review Editor Sarah Austin.
5. Veterans Voices:
Submissions to the Veterans Voices section will be vetted by members of the JVS editorial board; they will be edited for formatting and stylistic consistency. Suggested length is between 1,000 and 2,000 words. Submissions should contain the following:
Research articles must have the main text prefaced by an abstract of no more than 250 words summarizing the main arguments and conclusions of the article. This must have the heading "Abstract" and be easily identified from the start of the main text.
A list of up to six keywords must be placed below the abstract.
The abstract and keywords should also be added to the metadata when making the initial online submission.
The body of the submission should be structured in a logical and easy to follow manner. A clear introduction section should be given that allows non-specialists in the subject an understanding of the publication and a background of the issue(s) involved. Methods, results, discussion and conclusion sections may then follow to clearly detail the information and research presented.
Up to three level headings may be present and must be clearly identifiable using different font sizes, bold, or italics.
Supplementary Files (optional)
Any supplementary/additional files that should link to the main publication must be listed, with a corresponding number, title and option description. Ideally, the supplementary files are also cited in the main text.
e.g., Supplementary file 1: Appendix. Scientific data related to the experiments.
Note: Additional files will not be typeset so they must be provided in their final form. They will be assigned a DOI and linked to from the publication.
Ethics and consent statement (required*)
Research involving human subjects, human material, or human data, must have been performed in accordance with the Declaration of Helsinki. Where applicable, studies must have been approved by an appropriate ethics committee and the authors should include a statement within the article text detailing this approval, including the name of the ethics committee and reference number of the approval. The identity of the research subject(s) should be anonymized whenever possible. For research involving human subjects, informed consent to participate in the study must be obtained from participants (or their legal guardian). Experiments using animals must follow national standards of care. For further information, click here.
*All submissions must include an ethical statement addressing that the research has been approved by an appropriate ethics committee, with the name of the committee and reference number of study approval included within the submitted file. Otherwise, please, add a statement that explains ethics approval was not required.
Any acknowledgments must be headed and in a separate paragraph, placed after the main text but before the reference list.
Funding Information (optional)
Should the research have received a funding grant then the grant provider and grant number should be detailed.
Competing interests (required)
If any of the authors have any competing interests then these must be declared. A short paragraph should be placed before the references. Guidelines for competing interests can be found here. If there are no competing interests to declare then the following statement should be present: The author(s) has/have no competing interests to declare.
All references cited in the submission must be listed at the end of the main text file.
For the submission title:
Capitalize all nouns, pronouns, adjectives, verbs, adverbs, and subordinate conjunctions (i.e. as, because, although). Use lowercase for all articles, coordinate conjunctions, and prepositions.
Headings should be 75 characters or less and formatted according to the following conventions:
Title Case, Boldface, and Centered
Example: The Title of the Paper
Title Case, Boldface, and Left Aligned
Example: First Sub-Heading
Title Case, Boldface Italicized, and Left Aligned
Example: Second Sub-Heading
Submissions must be made in English. Authors are welcome to use American or British spellings as long as they are used consistently throughout the whole of the submission.
When referring to proper nouns and normal institutional titles, the official, original spelling must be used.
General Grammar Conventions
American or English grammar rules may be used as long as they are used consistently and match the spelling format (see above).
You must use a serial comma.
According to APA 7, authors must use specific tenses throughout their papers. In the “literature review” section, authors should use past or present perfect tense.
In the “method” section, authors should use past or present perfect tense.
In the “results” section, authors should use past tense.
If an author is describing his or her own reaction to any part of the study, then he or she can use past, present perfect, or present.
If an author is discussing the implications of his or her results, the he or she should use present tense.
If an author is discussing conclusions, future directions, or limitations, then he or she should use present tense.
The font used should be commonly available and in 12 point.
Underlined text should be avoided whenever possible.
Bold or italicized text to emphasize a point is permitted, although should be restricted to minimal occurrences to maximize their efficiency.
Use bullet points to denote a list without hierarchy or order of value. If the list indicates a specific sequence, then a numbered list must be used.
Lists should be used sparingly to maximize their impact.
Quotations that are longer than three lines in length must be in an indented paragraph separate from the main text.
Standard, non-italicised font must be used for all quotes.
It must be clear from the text and / or citation where the quote is sourced. If quoting from material that is under copyright then permission will need to be obtained from the copyright holder.
Acronyms & Abbreviations
With abbreviations, the crucial goal is to ensure that the reader – particularly one who may not be fully familiar with the topic or context being addressed – is able to follow along. Spell out almost all acronyms on first use, indicating the acronym in parentheses immediately thereafter. Use the acronym for all subsequent references.
A number of abbreviations are so common that they do not require the full text on the first instance. Examples of these can be found here.
Abbreviations should usually be in capital letters without full stops.
Common examples from Latin origin do not follow this rule and should be lower case and can include full stops.
Use of Footnotes/Endnotes
Use footnotes rather than endnotes.
All notes should be used only where crucial clarifying information needs to be conveyed.
Avoid using notes for purposes of referencing, with in-text citations used instead. If in-text citations cannot be used, a source can be cited as part of a note.
Please insert the footnote marker after the end punctuation.
Symbols are permitted within the main text and datasets as long as they are commonly in use or have an explanatory definition on their first usage.
Hyphenation, Em and En Dashes
There is no set rule on the use of hyphenation between words, as long as they are consistently used.
Em dashes should be used sparingly. If they are present, they should denote emphasis, change of thought or interruption to the main sentence and can replace commas, parentheses, colons or semicolons. Learn how to make an em dash.
En dashes can be used to replace ‘to’ when indicating a range. No space should surround the dash.
For numbers zero to nine please spell the whole words. Please use figures for numbers 10 or higher.
We are happy for authors to use either words or figures to represent large whole figures (i.e. one million or 1,000,000) as long as the usage is consistent throughout the text.
If the sentence includes a series of numbers, then figures must be used in each instance.
If the number appears as part of a dataset, in conjunction with a symbol or as part of a table, then the figure must be used.
If a sentence starts with a number, it must either be spelled or the sentence should be re-written so that it no longer starts with the number.
Do not use a comma for a decimal place.
For additional assistance with the guidelines below, please use the Purdue OWL reference guide.
Figures, including graphs and diagrams, must be professionally and clearly presented. If a figure is not easy to understand or does not appear to be of a suitable quality, the editor may ask to re-render or omit it.
All figures must be numbered and cited within the main text, in consecutive order using Arabic numerals (e.g. Figure 1, Figure 2, etc.). The numbered headings should be in boldface and left aligned.
Each figure must have an accompanying descriptive main title that is double-spaced beneath the numbered heading. The title should be in title case and italicized. Additionally, it should clearly and concisely summarise the content and/or use of the figure image. A short additional figure legend is optional to offer a further description. If included, the figure legend should be placed either within the figure or directly beneath the figure (not to the side).
Figure titles and legends should be placed within the text document, after the paragraph of their first citation.
The source of the figure should be included, along with any relevant copyright information and a statement of authorization (if needed). Any additional information pertinent to the figure should be added directly beneath the figure using a “note” heading that is title case, italicized, and followed by a period. The “note’s” information then follows as a complete sentence.
If your figure file includes text, then please present the font as Ariel, Helvetica, or Verdana. This will mean that it matches the typeset text.
NOTE: All figures must be uploaded separately as supplementary files during the submission process, if possible in color and at a resolution of at least 300dpi. Each file should not be more than 20MB. Standard formats accepted are JPG, TIFF, GIF, PNG, EPS. For line drawings, please provide the original vector file (e.g. .ai, or .eps).
Per APA 7, tables should only be included if the data presented in them requires three or more columns and rows. Data that does not meet this criterion should be embedded within the manuscript. Any tables included in the manuscript will be placed as close to their first citation as possible.
Tables must be created using a word processor's table function, not tabbed text.
All tables must be numbered and cited within the main text, in consecutive order using Arabic numerals (e.g. Table 1, Table 2, etc.). The numbered headings should be in boldface and left aligned.
Each table must have an accompanying descriptive main title that is double-spaced beneath the numbered heading. The title should be in title case and italicized. Additionally, it should clearly and concisely summarise the content presented in the table.
A short additional table legend is optional to offer a further description of the table. The legend should be placed underneath the table.
All columns must have headings. Headings within the table should not be wider than the widest entry in the column below it.
Only horizontal borders should be used. Spacing and consistent alignment across the table circumvents the need for vertical borders.
Aside from the subsequent guidelines, tables should also not include:
NOTE: If there are more columns than can fit on a single page, then the table will be placed horizontally on the page. If it still can't fit horizontally on a page, the table will be broken into two.
Every use of information from other sources must be cited in the text so that it is clear that external material has been used.
If the author is already mentioned in the main text, then the year should follow the name within parenthesis.
If the author name is not mentioned in the main text, then the surname and year should be inserted, in parenthesis, after the relevant text. Multiple citations should be separated by a semi-colon and follow alphabetical order.
If two authors are cited from the same citation, then they should both be listed. If three or more authors are part of the citation then ‘et al.’ should follow the first author name.
If citations are used from the same author and the same year, then a lowercase letter, starting from ‘a’, should be placed after the year.
Specific pages must be cited when the author is directly quoting another source or paraphrasing another source. If specific pages are being cited, then the page number should follow the year after a comma.
For publications authored and published by organizations, spell out the full name of the organization in the signal phrase when it is first used. Following this initial mention, use the acronym for consequent references and in-text citations. use the short form of the organization’s name or its acronym in lieu of the full name.
Please do not include URLs in parenthetical citations, but rather cite the author or page title and include all details, including the URL, in the reference list.
Please do not use auto-citing programs to compose the reference list as they do not always cite article title and book chapter titles correctly.
All citations must be listed at the end of the text file in alphabetical order of authors’ surnames.
All reading materials should be included in "References." Works which have not been cited within the main text, but which the author wishes to share with the reader, must be cited as additional information in endnotes explaining the relevance of the work. This will ensure that all works within the reference list are cited within the text.
According to APA 7, DOIs should be included for all reference entries, where possible.
For additional assistance with APA 7 format, please use the Purdue OWL reference guide.
As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal. Every effort has been made to ensure that the submission is ready for peer review according to the journal's review policy (following the instructions to ensure a blind peer review, which includes ensuring the following steps have been taken with regard to the text and the file properties:
For Microsoft 2003 and previous versions, and Macintosh versions of Word:
For MacIntosh Word 2008 (and future versions)
For Microsoft 2007 (Windows):
For Microsoft 2010 (Windows):